Description
Reverse Assembly for GY6 150cc Vehicles with an External Reverse Gearbox.
Gearbox details:
- 16 toothsprocket
- Sprocket OD: 87.4mm (3.43 in)
- Gear shaft ID: 20mm (0.787 in)
- Opposite side ID: 16.8mm (0.662 in)
- OD of gearbox: 130mm (5.14 in)
- (2) studs 91mm (3.58 in) apart center-to-center
- (2) threaded holes in side of case
This 150cc external reverse gearbox assembly is the reverse assembly unit used on all Hammerhead go-karts with ONLY Forward and Reverse. Will not work on 150cc vehicles that have a Forward, Neutral, and Reverse gearing setup.
Works with the following Hammerhead models:
- GT150
- SS150
- Standard Hammerhead
- Junior Hammerhead
- UM150
- LM150.
- Carter Talon series with external reverse
- 6.000.157
If your buggy has separate F / N / R (Forward, Neutral, and Reverse) gears, the vehicle has an internal reverse, and this reverse assy will not work with those vehicles.
This reverse gearbox assembly was used in a variety of Hammerhead vehicles, including 1st generation GTS models, all GT150 models, SS150, Standard 150, JR 150, and various other non-Hammerhead brands such as Carter Bros, Kinroad, SUNL, Massimo, Roketa, and more.
Hammerhead Part #6.000.019 is not available anymore from Hammerhead, but this product will replace 6.000.019 when used with the included bracket kit to retrofit.
Hammerhead Part #s 8.010.124, 8.010.125, 9.030.007 are all included with this assembly and are NOT sold separately from Hammerhead or other vendors.
This product is the same as the following vehicle specific part #s (can also apply to vehicles not listed here):
Hammerhead part # 6.000.157
Old TJ Power Sports part # 6.000.019
Reviews
There are no reviews yet.